Printronix PSA3 Manual De Usuario
68
Chapter
3
Configuring The KSSM Emulation With Control Codes
Set DBCS Character Half Width
ASCII Code FS SI
Hex Code
28 0F
Dec Code 1C
15
Purpose
Prints DBCS characters that follow at about half their normal
width, and SBCS characters maintain their normal width.
width, and SBCS characters maintain their normal width.
Comment
Use the FS DC2 command to cancel half-width DBCS
character printing.
character printing.
This command resets subscript/ superscript printing set by the
FS r command.
FS r command.
The default is Normal (non half-width) printing.
Cancel DBCS Character Half Width and
Super/Subscript Printing
Super/Subscript Printing
ASCII Code FS DC2
Hex Code
28 12
Dec Code 1C
18
Purpose
This command cancels the FS SI (half-width DBCS character)
and FS r (set super/subscript printing) commands.
and FS r (set super/subscript printing) commands.
Comment
The default is Normal (non half-width and non-super/subscript)
printing.
printing.
Set Horizontal Tabs
ASCII Code ESC D
n
1
n
2
…
n
k
NUL
Hex Code
1B 44
n
1
n
2
…
n
k
00
Dec Code 27
68
n
1
n
2
…
n
k
00
Purpose
Sets horizontal tab positions (in the current character pitch) at
the columns specified by
the columns specified by
n
1
to
n
k
as measured from the left-
margin position.
The values for
n must be in ascending order; a value of n less
than the previous
n ends tab setting (like the NUL code).
Where:
0 <=
0 <=
k <= 32
1 <=
n <= 255
n
k
>
n
k-1
Comment
Changing the character pitch does not affect current tab
settings.
settings.
Send an ESC D NUL command to cancel all tab settings.
The tab settings move to match any movement in the left
margin.
margin.