Printronix PSA3 Manual De Usuario
76
Chapter
3
Configuring The KSSM Emulation With Control Codes
Turn Auto-wrap Around On/Off
ASCII Code ESC d
n
Hex Code
1B 64
n
Dec Code 27
100
n
Purpose
Turns Auto-wrap Around on/off according to the following
values:
values:
n = 0 Turn off Auto-wrap Around. The characters beyond right
margin will be cut.
margin will be cut.
n = 1 Turn on Auto-wrap Around. The characters beyond right
margin will be printed on the next line.
margin will be printed on the next line.
Where:
n = 0, 1
n = 0, 1
Turn Double-Height Printing On/Off
ASCII Code ESC w
n
Hex Code
1B 77
n
Dec Code 27
119
n
Purpose
Turns on/off double-height printing of all characters, as
measured from the current baseline:
measured from the current baseline:
n = 1 or 49Turns on double-height
n = 0 or 48Turns off double-height
Where:
n = 0, 1, 48, 49
n = 0, 1, 48, 49
Comment
No change for line spacing.
This command only takes effect in SBCS mode.
The default is Normal (non double-height) printing.