Printronix P7000 Manual De Usuario
P-Series XQ Emulation
229
Define CR Code
This option controls the action of the printer when it receives a
Carriage Return code (hex 0D) from the host computer. If this
feature is enabled, each time the printer receives a Carriage
Return, it inserts an additional Line Feed code (hex 0A) into the
data stream. Do not use this feature if the host computer sends line
feeds to the printer.
Carriage Return code (hex 0D) from the host computer. If this
feature is enabled, each time the printer receives a Carriage
Return, it inserts an additional Line Feed code (hex 0A) into the
data stream. Do not use this feature if the host computer sends line
feeds to the printer.
•
CR = CR (default). Does not insert an extra line feed after each
carriage return.
carriage return.
•
CR = CR + LF. Inserts an extra line feed after each carriage
return. The next print position will be print position 1 of the next
line.
return. The next print position will be print position 1 of the next
line.
Auto LF
This option defines the printer action when print data is received
past the forms width setting.
past the forms width setting.
•
Disable (default). Discards any data past the forms width.
•
Enable. Performs an automatic carriage return and line feed
when data is received past the forms width.
when data is received past the forms width.
Define LF Code
•
LF = CR + LF (default). Forces an automatic carriage return
with each line feed command received. The next print position
is print position 1 of the next line.
with each line feed command received. The next print position
is print position 1 of the next line.
•
LF = LF. Does not perform an automatic carriage return when a
line feed command is received. The next print position will be
the current print position of the next line.
line feed command is received. The next print position will be
the current print position of the next line.