Printronix P5000LJ Manual De Usuario
308
Appendix B
Form Design Checklist
Form Design Checklist
Use this checklist to help you remember key areas of consideration when
designing and ordering forms and paper stocks.
designing and ordering forms and paper stocks.
Environment
________
Before they are used, forms are given at least 24 hours of
condensing time in the environment in which they will be used.
condensing time in the environment in which they will be used.
________
Forms are not stored in environments that result in damage such
as delamination of glue lines, creasing, folding, etc.
as delamination of glue lines, creasing, folding, etc.
Type Of Form
Recycled Paper? Yes _______ No _______ If yes, assure adequate form
strength to prevent tractor holes and perforations from tearing or detaching
during form feeds and page ejects.
strength to prevent tractor holes and perforations from tearing or detaching
during form feeds and page ejects.
Security Form? Yes _______ No _______ If yes, the last page of the form
should have a minimum 50% reflectance, and, if possible, the stippled page
faces inward to the form.
should have a minimum 50% reflectance, and, if possible, the stippled page
faces inward to the form.
Form Weight
Form weight = ________
(Minimum = 15 lb. / 6.8 kg ; Maximum = 100 lb / 45.36 kg)
(Minimum = 15 lb. / 6.8 kg ; Maximum = 100 lb / 45.36 kg)
Form Thickness
Form thickness = ________
(0.025 inches / 0.0635 cm maximum measured at the thickest point of the
form, which includes perforations, compressed staples, glue lines, etc.)
(0.025 inches / 0.0635 cm maximum measured at the thickest point of the
form, which includes perforations, compressed staples, glue lines, etc.)
Form Type (Check One)
1 Part
2 Part
3 Part
4 Part
5 Part
6 Part
<--------- Carbonless Range --------->
<---------------------------- Carbon Range ------------------------------>