Ricoh 2018D Manual De Usuario
Placing Originals
18
1
Placing Originals
Note
❒ Take care to place originals only af-
ter any correction fluid and ink has
completely dried. Not taking this
precaution could cause marks on
the exposure glass that will be cop-
ied onto paper.
completely dried. Not taking this
precaution could cause marks on
the exposure glass that will be cop-
ied onto paper.
Reference
For original sizes you can set, see
p.15 “Originals” .
p.15 “Originals” .
Original Orientation
You can set the original orientation in
the following ways.
This function is useful for copying
torn or large originals.
the following ways.
This function is useful for copying
torn or large originals.
Note
❒ Originals should normally be
aligned to the rear left corner.
However, some copy functions
may produce different results de-
pending on the orientation of the
originals. For details, see the expla-
nations of each function.
However, some copy functions
may produce different results de-
pending on the orientation of the
originals. For details, see the expla-
nations of each function.
Placing Originals on the
Exposure Glass
Exposure Glass
AAAA
Lift the exposure glass cover,
ADF or ARDF.
ADF or ARDF.
Important
❒ Do not lift the exposure glass
cover, ADF or ARDF forcefully.
If you do, the ADF or ARDF
cover might open or be dam-
aged.
If you do, the ADF or ARDF
cover might open or be dam-
aged.
Note
❒ Be sure to lift the exposure glass
cover, ADF or ARDF by more
than 30
than 30
°. Otherwise, the size of
the original might not be detect-
ed correctly.
ed correctly.
BBBB
Place the original face down on
the exposure glass. It should be
aligned with the rear left corner.
the exposure glass. It should be
aligned with the rear left corner.
1.
Positioning mark
2.
Left scale
Note
❒ Start with the first page to be
copied.
CCCC
Lower the exposure glass cover,
ADF or ARDF.
ADF or ARDF.
Originals
ADF or
ARDF
ARDF
Exposure
glass
glass
set11EE
set23EE
AAI025S
KirC2_GBcopyF_FM.book Page 18 Tuesday, August 26, 2003 5:42 PM