Microboards Technology Print Factory Manual De Usuario
Microboards Technology Print Factory
23
If the circle does not cross the circle at the zero’s, enter the vertical and horizontal numbers in
the Utility Tab.
Once the new numbers are entered, click Apply.
The Alignment CD pattern is also included on the PrintFactory CD, so you can print additional
Alignment patterns with your printer, once it is aligned. The alignment circle is 8 cm in
diameter and is 2 cm from the outer edge of the CD.
Alignment patterns with your printer, once it is aligned. The alignment circle is 8 cm in
diameter and is 2 cm from the outer edge of the CD.
Loading Discs
The next step is to load your Print Factory with discs. The system will accept CD or DVD 12 cm
inkjet printable discs. If the disc does not have an inkjet printable surface, the ink will not adhere to
the surface of the disc. The Print Factory will only accept 12 cm discs. Business card or 8 cm discs
are not supported by this system.
inkjet printable discs. If the disc does not have an inkjet printable surface, the ink will not adhere to
the surface of the disc. The Print Factory will only accept 12 cm discs. Business card or 8 cm discs
are not supported by this system.
Figure 1
Figure 2
Load the first 5 or 6 discs flat, as seen in figure 1.
Load the rest of the discs at an angle, as seen in figure 2.
The Print Factory will hold a maximum of 50 discs. DO NOT load more than 50 discs in the system,
as this will cause the discs to feed incorrectly.
Load the rest of the discs at an angle, as seen in figure 2.
The Print Factory will hold a maximum of 50 discs. DO NOT load more than 50 discs in the system,
as this will cause the discs to feed incorrectly.