Lexmark Pro915 Manual De Usuario
Working with photos
Using a memory card or flash drive with the printer
Insert a memory card into the card slot or a flash drive into the USB port
Inserting a memory card
Inserting a flash drive
SD/MS-Duo/MMC
Notes:
•
Insert the card with the brand name label facing up.
•
Make sure any arrows on the card point toward the printer.
•
If necessary, connect the memory card to the adapter that
came with it.
came with it.
•
Make sure that the memory card inserted is supported by the
printer. For more information, see “Supported memory cards
and file types” on page 45.
printer. For more information, see “Supported memory cards
and file types” on page 45.
•
The card reader light comes on when a memory card is inserted
and blinks when a memory card is being accessed.
and blinks when a memory card is being accessed.
SD/MS-Duo/MMC
FL
AS
H D
RIV
E
Notes:
•
The flash drive uses the same port that is used
for a PictBridge camera cable.
for a PictBridge camera cable.
•
An adapter may be necessary if your flash drive
does not fit directly into the port.
does not fit directly into the port.
SD/MS-Duo/MMC
FL
AS
H D
RIV
E
Warning—Potential Damage: Do not touch any cables, any network adapter, any
connector, the memory device, or the printer in the areas shown while actively
printing, reading, or writing from the memory device. A loss of data can occur.
connector, the memory device, or the printer in the areas shown while actively
printing, reading, or writing from the memory device. A loss of data can occur.
The Memory Device screen appears on the display.
Notes:
•
If the printer does not recognize the memory device, then remove and reinsert it.
•
If a flash drive or a digital camera set to mass storage mode is inserted into the USB port while a memory card is
in the card slot, then the display prompts you to choose which memory device to use.
in the card slot, then the display prompts you to choose which memory device to use.
Printing
44