Lexmark MX810dfe Manual De Usuario
Setting up Scan to Computer
Notes:
•
This feature is supported only in Windows Vista or later.
•
Make sure that your computer and printer are connected to the same network.
1
Open the printers folder.
In Windows 8
From the Search charm, type run, and then navigate to:
Apps list > Run > type control printers > OK
In Windows 7 or earlier
a
Click
or click Start, and then click Run.
b
In the Start Search or Run dialog, type control printers.
c
Press Enter, or click OK.
2
Depending on your operating system, click Add devices and printers, Add a device, or Add a printer.
3
Select your printer from the list.
Note: To identify your printer, print a network setup page, and then look for “Fully Qualified Domain Name” in
the TCP/IP section.
the TCP/IP section.
4
Click Next > Close.
5
Depending on your device, do either of the following:.
•
Press and hold the printer you want to configure.
•
Right
‑click the printer you want to configure.
6
From the menu that appears, select Scan Properties or Properties, and then change the settings as necessary.
7
From the printer control panel, touch Scan to Computer and then select from the following options:
•
Scan—Scan and save the document directly to a selected location on the computer.
•
Scan for Print—Scan and automatically print the document.
•
Scan for E
‑mail—Attach a scanned document to an e‑mail.
•
Scan for Fax—Attach a scanned document to be sent through fax.
8
Touch Send It.
Remote scan in progress
appears on the printer display. The scanned image opens automatically on the
computer screen.
Scanning to a flash drive
1
Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Notes:
•
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF tray. Place these items on the scanner glass.
clippings) into the ADF tray. Place these items on the scanner glass.
Scanning
154