Lantronix LPS1-2 Manual De Usuario
LAT Host Troubleshooting
LAT Configuration
6-2
6.2 LAT Host Troubleshooting
By default, the LAT error message codes on the host are not translated into text error mes-
sages. If a LAT job fails and appears in the queue with an eight-digit hex result code, the
code can be translated by issuing the following commands:
sages. If a LAT job fails and appears in the queue with an eight-digit hex result code, the
code can be translated by issuing the following commands:
Figure 6-4: Translating LAT Error Codes
$ SHOW QUEUE/FULL/ALL queue_name
(note the error code nnnnnnnn)
$ SET MESSAGE SYS$MESSAGE:NETWRKMSG.EXE
$ EXIT %Xnnnnnnnn
Table 6-1: Troubleshooting LAT Configurations Using a Port
Area to check
Explanation
The specified node name matches the
MPS node name
MPS node name
Use the Show Server command to verify.
The specified port name matches the
port’s name
port’s name
Use the List Port 1 command to verify.