Konica Minolta 7135 Manual De Usuario
3-12
Selecting Magnification Ratio (Lens Mode)
When the copier is turned ON, the magnification ratio is set to 1.00 (100%) automatically
on the Basic Screen.
Follow each procedure described in this section to select the desired magnification
ratio.
on the Basic Screen.
Follow each procedure described in this section to select the desired magnification
ratio.
To Copy in 1.00 Magnification Mode
Follow this procedure to make a 100% copy of the original image.
1.
Close the RADF securely, then press [AUTO RESET].
The initial settings are restored. Check that APS indicates that the 1.00 magnification
is selected.
is selected.
HINT
The initial settings may be altered by the Key Operator. See p. 11-7 to p.
11-14.
11-14.
2.
Select additional copy conditions, as desired.
DETAILS
Specifying copy size will release 1.00 magnification and set -A- (AMS)
automatically. In this case, touch 1.00 to highlight it again.
automatically. In this case, touch 1.00 to highlight it again.
3.
Enter the desired print quantity from the control panel keypad.
HINT
See p. 3-7 for details on setting print quantity.
4.
Position original(s).
HINT
See p. 3-2 to p. 3-6 for details on positioning originals.
5.
Press [START].