KYOCERA 2020D Manual De Usuario

Troubleshooting

6-5

The following table lists errors and maintenance messages that you can 
be dealt with by yourself.

If 

Call service or Error.Power off. is displayed, turn off the 

printer then turn it back on to see if the printer has recovered. If the 
printer has not recovered, turn off the printer, disconnect the power cord, 
and contact your service representative or authorized service center.

Some errors cause the alarm to sound. To stop the alarm, press 

[Cancel]. 

Account error ##
Press GO

This message is displayed when the Job Accounting function is enabled and an attempt to 
specify job accounting settings or to register or delete an account fails. To return the printer to 
the print-ready status, press 

[GO].

Add paper MPTray

The paper has run out in the paper source displayed. Supply paper according to the paper 
source displayed (paper cassettes, MP tray, or optional paper feeders).This message is 
displayed alternately with messages indicating the printer status, such as, 

Ready, Please 

wait, and Processing.

Call service
    F###:

F### represents a controller error (#=0, 1, 2, ...). Call for service. The printer does not 
operate when this message is displayed.

Call service
    ###

#

:0123456

#### represents a mechanical error (#=0, 1, 2, ...). Call for service. The printer does not 
operate when this message is displayed. The total number of pages printed is also indicated, 
e.g. 

0123456.

Canceling data

Displayed when data is being canceled.

Cassette #
not loaded

The corresponding paper cassette is not installed. Install the cassette. The cassette number 
can be 1 (topmost) to 4 (bottom).

Change envelope
switch position

Displayed when the paper type does not match the envelope switch setting.

Check
cassette #

This message is displayed when a paper lift error has occurred in the paper source’s 
cassette. Pull out the cassette for the paper source displayed (either the paper cassettes or 
optional paper feeders) and check if the paper is loaded correctly.

The message 

Call service is displayed when this error occurs repeatedly.

Check waste
toner box

This message warns following two cases. Install the new waste toner box.

The waste toner box is not installed. 

The waste toner box is full.

Clean printer
Press GO

Please clean the inside of the printer. Refer to Cleaning the Printer on page 1-7.

This message will be displayed when replacing the toner container after the message 
Replace toner Clean printer is displayed. After cleaning the inside of the printer, 
press 

[GO] and the printer will be ready for printing.

Close
left cover

The left cover of the printer is open. Close the printer left cover.