Sharp MX-7040N Manual De Usuario

Tap this to switch the job build mode on or off.

Setting it to On scans a large number of originals in segments.

Tap this to switch the slow scan mode on or off.

Setting it to On prevents slips or other thin paper sheets from 

getting jammed when they are scanned.

Use this to switch the mixed size original mode on or off.

Setting it to On scans originals of different sizes together using the 

automatic document feeder.

Tap this to switch the original count setting on or off.

Setting it to On sends fax after checking the scanned number of 

original sheets.

Select a destination from the transmission log screen.

Select a destination from the search number.

Sends the scanned original without saving it to the memory.

A destination is searched for in the global address book.

Displays the original settings on the lower centre of the panel.

Specify the edge erase (centre erase) and 

erase width of the original to be sent

Scans each facing page of a bound document

Sends a pamphlet original by splitting it by page

Sends both sides of a card as a single page

Automatically performs transmission or polling 

reception at the specified time

Stamps scanned originals (optional)

Select sender information for fax transmission

Prints the transaction report

Use this to register and manage the data to be 

sent when receiving data from the other machine 

by polling, as well as manage the data received by 

confidential reception.

Saves the send data on the hard disk drive of 

the machine.

Temporarily saves the send data on the hard disk 

drive of the machine

Sends two pages as a single page

The original data placed in the other machine is 

retrieved by operating your machine

This manual contains references to the fax function. However, please note that the fax function is not available in some countries and regions.