OKI C7100 Manual De Usuario
C7100/C7300/C7500 Troubleshooting • 383
Cannot configure for USB connection.
NOTE
• Windows 95 does not support USB.
• Windows 98 upgraded from Windows 95 may not support
• Windows 98 upgraded from Windows 95 may not support
USB.
• Windows 98 original installation and Windows Me, 2000,
NT and XP all support USB.
Possible cause
Remedy
Computer does not
support USB
interface.
support USB
interface.
Check if there is a USB controller in the Windows
device manager.
device manager.
USB cable does
not meet
specifications.
not meet
specifications.
Use USB cable to specification Ver.1.1.
Interface is
disabled.
disabled.
Check that USB interface is set to Enable.
Configuration
procedure was not
correctly followed
or cancelled.
procedure was not
correctly followed
or cancelled.
Configure again from the beginning.
USB cable is
disconnected or
faulty.
disconnected or
faulty.
Reconnect or try another cable.
A USB hub is
being used.
being used.
The printer cannot be used with a USB hub.
Connect the printer and computer directly.
Connect the printer and computer directly.