OKI ES3640E MFP Manual De Usuario

ES3640e MFP EFI User’s Software Installation Guide - 51

If you installed the driver from the Drivers CD (CD1), this 

procedure is not necessary. TCP/IP connection will have been set 
up automatically during the installation.

Once you have installed the PostScript and printer driver files, 
complete the setup for the TCP/IP and LPR connection as follows:

• Prepare the Fiery to accept print jobs using TCP/IP and LPR 

protocols. For details, see Chapter 2 of the Configuration Guide.

• Install OKI LPR software utility from the Drivers CD (CD1).

• Run OKI LPR and add the printer by discovery on the network. 

(See the Help screens with the OKI LPR utility.)

Before you continue, contact the system administrator for the IP 
address assigned to the Fiery, as well as the subnet mask and the 
gateway address, if they are used.

The TCP/IP protocol should already be installed on the Windows 
2000/XP/Server 2003 workstation.

You can also set up the LPR connection by installing Print 

Services for UNIX, which is supplied as an add-on Windows 
component with your Windows 2000/XP/Server 2003 CD. For 
more information, see your Windows documentation.

1. Insert the Drivers CD (CD1) and wait for the CD Installer to autorun.

If the setup program does not start after a minute or so, navigate 
to the CD top level directory and run setup.exe.

2. Choose you preferred installer language and wait for main installer screen 

to appear. If necessary, click Accept when prompted to accept the licence 
conditions.