OKI DP-5000 Manual De Usuario

The Dye Sublimation Upgrade Kit enables your OKI
DP-5000 to print true continuous-tone images, without
dots, through the magic of dye sublimation technology.
The upgrade itself is as simple as plugging in the spe-
cial electronic key and pressing a button. At the same
time, you lose none of the other features of the DP-
5000, and you can still print with other DP-5000 supply
inks anytime you want.

To install the DP-5000 Dye Sublimation Upgrade Kit
for a Windows PC (parallel port connection), an Apple
iMac (USB port connection) or a Macintosh (SCSI in-
terface module) follow these steps:

1.

Turn off the computer and printer, and then dis-
connect the printer cable (or SCSI cable for the
Macintosh) and power cord from the printer.

2.

Remove the rectangular plastic connector cover
located to the right of the printer connector on the
back of the printer. Locate the black tab at the
bottom of the connector cover, pull it up and twist
it until it breaks free, revealing the accessory con-
nector beneath. 

3.

If using Apple Macintosh remove SCSI interface
module from the back of the printer to reveal the
accessory connector just to the right of the printer
connector.

4.

Plug the electronic key (1) from the Upgrade Kit
into the accessory connector (2) with the notched
corner of the key on top, as shown below.  The
connector only fits one way.

5.

Reconnect the printer cable.

6.

Load the printer with standard ink cartridges
(cyan, magenta, yellow, and black). DO NOT
load the special dye sublimation ink cartridges at
this time.

7.

Turn on the printer.

1

2