OKI DP-5000 Manual De Usuario
8
User’s Guide
2.
SCSI connector - The SCSI connectors are used
for connecting to the Macintosh computer and/or
other SCSI devices.
other SCSI devices.
3.
Paper feed switch - This switch sets the paper
feeding method to automatic feed mode or man-
ual feed mode.
ual feed mode.
4.
Power socket - The power cable connects to the
power socket.
Inside the printer
1.
Marking sticker - The marking sticker confirms
that the carriage is in the standard position. Try
not to smear the face of the sticker. If it gets dirty,
gently clean it with a dry cotton swab. As you do
so, be careful not to peel it off.
not to smear the face of the sticker. If it gets dirty,
gently clean it with a dry cotton swab. As you do
so, be careful not to peel it off.
2.
Ink cartridge holder plate - There are four holder
plates which hold the two ink cartridges each
needed for a particular printing job. A maximum
of seven ink cartridges is allowed.
of seven ink cartridges is allowed.
3.
Carriage - The carriage automatically picks up
the specific ink cartridge needed for printing and
moves it to the printing location. The carriage
also contains the print head.
moves it to the printing location. The carriage
also contains the print head.
4.
Release lever - This lever, located to the right of
the carriage and platen, is used to clear paper
jams. Press the release lever down to remove the
jammed paper. When you close the front cover,
the lever will automatically go back to its original
position.
jams. Press the release lever down to remove the
jammed paper. When you close the front cover,
the lever will automatically go back to its original
position.
5.
Print head - The print head prints the characters.
Take care not touch the underside of the head.
1
2
3
4
5