OKI DP-5000 Manual De Usuario
English
Chapter 4 - Installation and Operation, Macintosh
33
Selecting the correct driver
Before creating any documents in your application you
should select the DP-5000 printer driver which you in-
stalled from the CD-ROM. If you want to print docu-
ments created when this printer driver was not selected,
first select the DP-5000 printer in the
should select the DP-5000 printer driver which you in-
stalled from the CD-ROM. If you want to print docu-
ments created when this printer driver was not selected,
first select the DP-5000 printer in the
Chooser
menu,
then choose
Page Setup
from your application’s
File
menu. Finally change the application’s page format and
other settings if needed.
other settings if needed.
Follow the steps below to select the correct printer driv-
er.
er.
1.
From the Apple menu, select the
Chooser
.
2.
Click on the DP-5000 printer driver icon on the
left side of the screen. The box on the right dis-
plays the SCSI device number of the printer.
left side of the screen. The box on the right dis-
plays the SCSI device number of the printer.
Note:
Make sure the device number in the
Make sure the device number in the
Select a SCSI port
box is highlighted. If it is not, your printer is not being
recognised. Click on the device number a few times. If
it is still not highlighted, it is possible that the
recognised. Click on the device number a few times. If
it is still not highlighted, it is possible that the
Finder
has insufficient memory. In this case, close the
Chooser,
run any one of your application programs,
and select the printer from the
Chooser
again.
3.
If you have several identical printers connected,
click on the SCSI device number of the printer
you will use. The factory device setting is #6. To
change SCSI device numbers, see ‘Specifications
and Settings’ in Chapter 8.
click on the SCSI device number of the printer
you will use. The factory device setting is #6. To
change SCSI device numbers, see ‘Specifications
and Settings’ in Chapter 8.
Note 1:
If you have more than one SCSI bus in your Macintosh,
“SCSI #6 BUS #1” or similar will be displayed.
If you have more than one SCSI bus in your Macintosh,
“SCSI #6 BUS #1” or similar will be displayed.
Note 2:
Immediately following installation, background print-
ing is turned off. Click on the
Immediately following installation, background print-
ing is turned off. Click on the
On
button to enable
background printing. Background printing will not be
available if you did not install the Queue Kit software.
available if you did not install the Queue Kit software.
4.
Click on the
Close
box to close the
Chooser.
5.
When the selected printer driver is changed from
a previous printer driver, a dialogue box will
appear to inform you that a different printer has
been selected. Click on the
a previous printer driver, a dialogue box will
appear to inform you that a different printer has
been selected. Click on the
OK
button to close the
dialogue box.
Testing the printer
To make sure the printer is functioning correctly, use
the
the
Print Desktop
command in the
Finder.
Before us-
ing
Print Desktop
check the following: