OKI LED Printer Manual De Usuario
E-35
Symptom: Cannot get justified right margin with a
proportionally spaced font.
Problem: Right justification with proportional fonts is a
software feature.
Solution: Check your software manual to see if this
feature is supported.
Symptom: Control codes not operating correctly.
Problem: Incorrectly entered control codes.
Solution: Check for confusion of letter l with number 1,
Problem: Incorrectly entered control codes.
Solution: Check for confusion of letter l with number 1,
letter O with number 0; make sure you are using
upper/lower case correctly; make sure font is
specified correctly and is available.
upper/lower case correctly; make sure font is
specified correctly and is available.
Symptom: Data is sent to printer, but nothing happens.
ON-LINE message appears.
Problem: Wrong interface cable.
Solution: Use correct cable. If optional Serial I/F is
Solution: Use correct cable. If optional Serial I/F is
installed, make sure RS232C Serial is selected in the
Level 1 menu and RS232C Serial settings in Level 2
menu are correct.
Level 1 menu and RS232C Serial settings in Level 2
menu are correct.
Symptom: Last page of document not printed.
Problem: No form feed provided at end of document.
Solution: Press the ON-LINE button to take the printer
Problem: No form feed provided at end of document.
Solution: Press the ON-LINE button to take the printer
off-line, then press the FORM FEED button to eject
the final page or send the form feed code (decimal
character 12).
the final page or send the form feed code (decimal
character 12).
Symptom: First line on page won’t print.
Problem: Tops of letters extend into unprintable area,
Problem: Tops of letters extend into unprintable area,
so none of them print.
Solution: Set your software to print within the printable
area.
Symptom: Parts of control codes are printed at the
beginning of documents.
Problem: Command sent is not a true printer
command, generally because the ESC character was
not sent.
not sent.
Solution: Before sending control codes through an
application, make sure the ESC character can be
entered, and is entered properly.
entered, and is entered properly.