OKI ML320Turbo Manual De Usuario
44
Microline 320/321 Turbo/n
|
Setting Top of Form, Forms Tear-Off ON
(Step A)
(Step A)
!
If you turn the platen knob when the printer is turned
on, you will cause the Top of Form to mis-align. Always
turn the printer off before turning the platen knob!
on, you will cause the Top of Form to mis-align. Always
turn the printer off before turning the platen knob!
!
Always determine the status of the Forms Tear-Off menu
setting BEFORE setting the Top of Form. Refer to
“Using Your Printer, Top of Form, Forms Tear-Off
Status (ON or OFF).”
setting BEFORE setting the Top of Form. Refer to
“Using Your Printer, Top of Form, Forms Tear-Off
Status (ON or OFF).”
1
Turn the printer ON.
2
Park the paper.
3
With paper out of the unit, (red alarm light should be on)
press SHIFT (1) and QUIET/TOF (5) to reset the current
Top of Form.
press SHIFT (1) and QUIET/TOF (5) to reset the current
Top of Form.
4
Press FF/LOAD (3) to load the paper.
5
Press SEL/MENU (6) to take the printer off line.
The SEL light goes out.
6
Wait until the paper moves up to the tear position, then
press and hold TEAR (4).
press and hold TEAR (4).
The paper moves to the current Top of Form.
Keep pressing and holding TEAR.
7
Press and hold SHIFT and release TEAR.