OKI C821 Manual De Usuario
Menu functions - C821 and C830 > 64
HDD Setup
(cont.)
(cont.)
Format
Partition
Partition
PCL
Common
PS
Common
PS
Formats a specified partition.
When the Enter button is pressed, the following
confirmation message appears.
Are You Sure? Yes/No
If No is selected, you will return to the previous menu.
If Yes is selected, the following confirmation message
appears.
Execute Now? Yes/No
If No is selected, you will return to the previous menu.
The request to execute partition formatting is put into the
memory and formatting will be executed at next power
cycle.
If Yes is selected, shutdown takes place and the partition
is formatted at power Off/On cycle.
In Non-PS machines, PS is replaced by Common, so the
message is displayed as “PCL/Common/Common”.
When the Enter button is pressed, the following
confirmation message appears.
Are You Sure? Yes/No
If No is selected, you will return to the previous menu.
If Yes is selected, the following confirmation message
appears.
Execute Now? Yes/No
If No is selected, you will return to the previous menu.
The request to execute partition formatting is put into the
memory and formatting will be executed at next power
cycle.
If Yes is selected, shutdown takes place and the partition
is formatted at power Off/On cycle.
In Non-PS machines, PS is replaced by Common, so the
message is displayed as “PCL/Common/Common”.
System
Setup
Setup
Near Life
Status
Status
Enable/Disable
Sets the LCD display control whennear life warning of a
drum, fuser or trancfer belt occurs.
ATTENTION LED is lit if ENABLED
drum, fuser or trancfer belt occurs.
ATTENTION LED is lit if ENABLED
Near Life
LED
LED
Enable/Disable
Controls the settings of the Attention LED when near end
of life warning of toner, drum, fuser, or belt occurs.
Attention LED is lit when enabled, not lit if disabled.
(Displays LCD message.)
The temporary recovery by opening and closing of the
cover in Life error is not included.
of life warning of toner, drum, fuser, or belt occurs.
Attention LED is lit when enabled, not lit if disabled.
(Displays LCD message.)
The temporary recovery by opening and closing of the
cover in Life error is not included.
Change
Password
Password
New
Password
Password
xxxxxxxxxxxxxx
Sets a new password to enter Admin Setup menu
From 6 to 12 alpha/numeric digits can be entered.
From 6 to 12 alpha/numeric digits can be entered.
Verify
password
password
xxxxxxxxxxxxxx
Forces the User to input the new password to enter Admin
Setup.
From 6 to 12 alpha/numeric digits can be entered.
Setup.
From 6 to 12 alpha/numeric digits can be entered.
Settings
Reset
Settings
Settings
Execute
Resets EEPROM of CU. Resets User menu to the factory
default.
If Execute is selected, exits from the menu.
default.
If Execute is selected, exits from the menu.
Save
Settings
Settings
Execute
Saves menus currently set. With this function, the menus
with which operation was last performed are saved, and
overwrites with them menus that were previously saved.
When the Enter button is pressed, the following
confirmation message appears.
Are You Sure? Yes/No
When No is selected, the preceding menus are restored.
When Yes is selected, the current menu settings are
saved and this menu is exited.
with which operation was last performed are saved, and
overwrites with them menus that were previously saved.
When the Enter button is pressed, the following
confirmation message appears.
Are You Sure? Yes/No
When No is selected, the preceding menus are restored.
When Yes is selected, the current menu settings are
saved and this menu is exited.
ITEM
SETTINGS
EXPLANATION