OKI C810 Manual De Usuario

Menu functions - C830 > 34

It should be noted that many of these settings can be, and often are, overridden by settings 

in the Windows printer drivers. However, several of the driver settings can be left at 

“Printer Setting”, which will then default to the settings entered in these printer menus.
Where applicable, factory default settings are shown in bold type in the following tables.
In the normal operating condition, known as “standby,” the printer’s LCD window will show 

“Ready to Print”. In this condition, to enter the menu system, press the up and down Menu 

buttons on the operator panel to move up and down through the list of menus until the 

menu you wish to view is displayed. Then proceed as follows:
1.

Press Enter to enter the menu.

Use the up or down Menu buttons on the control panel to scroll through the menus. 

When the item you want to change is displayed, press Enter to view the sub-menus 

for that item.

Use the up or down Menu buttons to move up and down through the sub-menu 

items. When the item you want to change is displayed press Enter to display the 

setting.

Use the up or down Menu buttons to move up and down through the available 

settings for the sub-menu item. When the item you want to change is displayed 

press Enter to display the setting. An asterisk (*) will appear next to the setting, 

indicating that this setting is currently in effect.

Do one of the following:

Press Back again to move up to the list of menus;

or…

Press On Line or Cancel to exit from the menu system and return to standby.

You can set whether to ENABLE or DISABLE each category in the user menu.
Disabled categories are not displayed in the User’s menu. Only a system administrator can 

change these settings.
1.

Turn OFF the printer.

Turn ON the printer while pressing the Enter button.

When Boot Menu appears, take your finger off the button.

Press the Enter button.

When Enter Password appears, press the up or down MENU button, each time 

followed by Enter, then Enter several times to input the 1st line of the your 

password, and then press the Enter button.
Enter your 4 to 9 digit password.
(The default password is aaaaaa).

Press the Enter button.

Press the up or down Menu button until the “category” you want to change is 

displayed.

When it is, press the Enter button.

Press the  up  or down Menu button 

until the “item” you want to change is displayed.

When it is displayed, press the

 

Enter button.