OKI ML5520 Manual De Usuario

TROUBLESHOOTING > 66

Problem

There are dots missing in my printouts.

Solution

The head gap may not be set correctly. Try moving the headgap lever
to a lower setting. If that doesn’t help, the printhead may be
damaged; call for service.

Problem

The

ALARM light is flashing.

Solution

Try turning the printer

OFF and then back ON again. If the light still

blinks, call for service.

Problem

The

ALARM light is ON and the Character Pitch 10 light is flashing.

Solution

This indicates that the paper lever is set at the wrong position for the
paper you are trying to use. Move it to the proper setting.

Problem

The

ALARM light is ON and the Character Pitch 15 light is flashing.

Solution

This indicates a paper jam. Press the

SEL

key and correct the paper

jam situation. See “Clearing Paper Jams,” in Chapter 3.

Problem

The printer needs paper. The

ALARM is not ON and I can’t load paper.

Solution

Press and release the

SEL key.

Press and hold the

SHIFT key and press the RESET /

CHARACTER PITCH key.

The

ALARM light illuminates and you can now load paper.