OKI ML6300 Manual De Usuario

Operating instructions > 41

Use the following procedure to set TOF to accord with the 
reference position (6.35 mm (0.25 in)). The reference position 
refers to the first line of the paper i.e. the position to which the 
printer feeds the paper when automatically loading the paper.

Print out the menu settings of the printer as in 

 and confirm that 

the TOF (in cut sheet mode or continuous forms mode) is 
6.35 mm (0.25 in).

Set the Paper Type lever to the required paper type.

When continuous forms are used, place the paper on the 
Pin Tractor.

For cut sheet mode, do not insert the paper at this stage.

In continuous forms mode, press the FF/LOAD button.

In cut sheet manual feeding mode, press the FF/LOAD 
button and place the paper on the Paper Tray.

After the paper has started to be taken into the printer, 
continue to press the FF/LOAD button and the paper is 
taken into the 6.35 mm (0.25 in) position.

Align the paper with the first print line position as follows:

In off-line mode, press the following buttons to adjust the 
first printing line:

To feed the paper forward by a small amount, hold down 
the SHIFT button and press the FF/LOAD button.

To feed the paper backward by a small amount, hold down 
the SHIFT button and press the LF button.

When the paper is positioned at the required TOF, release 
the buttons in Step 5 above.
To save this position as the TOF, press the SEL button to