OKI 6200E Manual De Usuario

3. Associate a print queue with the new local printer 

port.

Once the installation is complete, you can verify com-

munication by printing a configuration sheet.

•

You must have network administrator privileges to 

install the Network Print Server.

•

You must have physical access to an OS/2 file 

server to host the OKI software utilities.

•

Write down the serial number and the Ethernet 

address of your Network Print Server. You can find 

the information on the test printout.

•

OS/2 and LAN Manager/LAN Server must be con-

figured with the following protocol: DLC/802.2 pro-

tocol stack

•

LAN Manager users must enable the remote boot 

facility.

•

LAN Server 2.X users must run the LAN Server 

installation utility and select the 802.2 protocol.

•

LAN Server 3.0 users must run the LAPS utility and 

select the 802.2 protocol.

•

OS/2 Warp Users must run the MPTS utility and 

select the 80w.w protocol. See your network 

administrator or the LAN Manager/LAN Server 

manuals for instructions. 

•

The initial installation requires the file server to be 

brought down and then back up again. This may be 

a consideration when you are planning your install.