OKI 6200E Manual De Usuario

OkiLAN 6200e Plus User’s Guide

EtherTalk Support for Apple Macintosh

190

Enable Port
This option allows you to enable or disable a port. If a

port is disabled, it appears in the Network Print Server

utility but does not appear in the Chooser. A disabled

port cannot be configured. The only valid options for a

disabled port are Status, Enable Port, Print Config,

and Restore Defaults. A port should be disabled when

no printer is attached.

Note: It is possible to disable all ports but this is

not recommended. The EtherTalk protocol will still

be active on the network. To disable the EtherTalk

protocol, use a utility from one of the other proto-

cols.

Reset Board
This option resets the print server.

Restore Defaults
This option automatically returns the EtherTalk inter-

face to its factory defaults. All ports will be restored to

factory defaults.

The following Network Print Server variables will

restore to default:

Name: OKI <serial number> Port <port number>

(for single port products, the port number is not

shown)

Type 1 = LaserWriter

Type 2 = (None)

Zone = Default - (The default zone for the network

segment is used)

Port Enabled = Yes