OKI 6200E Manual De Usuario

The entry should be similar to the following:

local_print_queue_name|[printer_model
_and_manufacturer]:\:lp=:mx#0:rm=Netw
ork_Print_Server_name:\:rp=remote_pri
nt_queue_name:\:sd=path_to_spool_dire
ctory:lf=just log_file_name

local_print_queue_name
The local_print_queue_name defines the name of the 

printcap entry. It is used by the lpr/lpd utilities to spec-

ify which printcap entry is being referenced. Additional 

printcap entries can be added as needed for different 

queue types. Each entry must have a unique 

local_print_queue_name and a different spool direc-

tory to work properly. When you are ready to print, use 

the local_print_queue_name that matches the data 

type of the file to be printed.

Network_Print_Server_name
This is the name (alias) of the Network Print Server. 

This must be the same name as entered in the /etc/

hosts file or your NIS or DNS system. An IP address 

may also be used here.

remote_print_queue_name
The remote_print_queue_name entry determines the 

Network Print Server port where the print job will be 

printed and optionally specifies ASCII printing.

path_to_spool_directory
This is the path to a directory where the print jobs will 

be spooled for this queue. You must create a unique 

spool directory for each printcap entry.