OKI C9500 V2 Manual De Usuario
UNIX 80
Operating system configuration
This section explains how to configure a printer for major UNIX
operating systems.
operating systems.
Sun OS 4.x.x (BSD) configuration
The following explanation uses Sun OS 4.1.3 and a C7300V2 printer
as examples. The absolute path of commands and the configuration
method may differ between OS versions, so refer to the workstation
manuals for more information.
as examples. The absolute path of commands and the configuration
method may differ between OS versions, so refer to the workstation
manuals for more information.
If an incorrect IP Address, Subnet Mask or Gateway is entered, the
network may go down or other damage may occur. Check the address
with the network manager and confirm that the IP address of the
printer has been set.
network may go down or other damage may occur. Check the address
with the network manager and confirm that the IP address of the
printer has been set.
1.
Login as [root] to the workstation.
If you do not have Superuser rights, the network manager should
conduct the configuration.
conduct the configuration.
2.
Register the IP address of the network card and the host name
in the /etc/hosts file.
in the /etc/hosts file.
Example: for IP address 192.168.20.127 and host name c7300v2
192.168.20.127 c7300v2
3.
Use the
ping command to confirm connection with the network
card.
Example: for host name c7300v2
# ping c7300v2
If there is no reply, then there is a problem with the configuration of
the IP address (the IP address has already been set manually or
dynamically) or with the network. Reset the network interface card
settings to their defaults and then try to set a temporary IP address. If
the IP address (the IP address has already been set manually or
dynamically) or with the network. Reset the network interface card
settings to their defaults and then try to set a temporary IP address. If