OKI 9400 Manual De Usuario
2, -1
PROCESS MODE
(see explanation below)
(see explanation below)
TYPE1,
TYPE2
Process Mode
If you are printing web pages and the printing is too light, temporarily change this setting to
Type 1. For occasional use only.
Type 1. For occasional use only.
Disk Maintenance Menu
The Disk Maintenance Menu can be used to initialize the printer's internal hard disk drive, to
reassign the partition contents, or to reformat the partitions.
reassign the partition contents, or to reformat the partitions.
Unless you know what you are doing, please avoid this section of the Menu.
It is recommended that disk maintenance be done through the OKI Storage Device Manager
software by the System Administrator, or by someone who is knowledgeable in this area.
software by the System Administrator, or by someone who is knowledgeable in this area.
Information Menu
The Information Menu provides printouts of information about the printer. It is also used to print
the demo page(s).
the demo page(s).
When the message EXECUTE appears, press SELECT to print the information provided.
Defaults are
red bold
print.
Item (see descriptions below)
Values
PRINT MENU MAP
EXECUTE
EXECUTE
Not applicable.
PRINT FILE LIST
EXECUTE
EXECUTE
Not applicable.
PRINT PCL FONT
EXECUTE
EXECUTE
Not applicable.
PRINT PS FONT
EXECUTE
EXECUTE
Not applicable.
PRINT DEMO
DEMO1
… DEMOn*
PRINT ERROR LOG
EXECUTE
EXECUTE
Not applicable.
* DEMO1 is built into the printer. Other Demos can be generated and saved in the Flash
memory or on the printer's internal hard disk drive (standard on Models C9200n, C9200dxn and
C9400dxn; optional on Model C9200).
memory or on the printer's internal hard disk drive (standard on Models C9200n, C9200dxn and
C9400dxn; optional on Model C9200).
117