OKI 9400 Manual De Usuario

used). 

7.  Click OK twice and print the document. 

 

To print a proof using the Windows NT 4.0 PostScript driver: 

1.  Open the document in the application. 

2. Click 

File

 → Print. 

The Print dialog box appears. 

3.  Make sure the OKI C9200 or C9400 PostScript printer is selected and the application's 

collate feature is turned off, then click Properties (or your application's equivalent). 
The OKI Properties dialog box appears. 

4. Under 

Paper/Output: 

a.  Click Copy Count and select the number of copies you wish to print. 

Note: If Job Type is grayed out, click Start

 → Settings → Printers; right-click the printer 

icon, then click Properties. Click the Device Settings tab, then scroll down to Installable 
Options. Click Hard Disk and select Installed, then click OK and close the Printers 
dialog box. 

b.  Click Job Type and select Proof and print under Change 'Job Type' Setting. 

The JOB PIN dialog box appears. 
 

 

 

5.  Under Job Name Setting, enter a Job Name having up to 16 characters. 

6.  Enter the four-digit password (PIN) assigned to you by your network administrator, or 

create one using any combination of numeric characters 0 through 7 (8 and 9 cannot be 
used). 

7.  Click OK twice and print the document. 

 

 

 

234