OKI 9400 Manual De Usuario

If you create a black oval in MS Paint and leave all the color command filters checked, the 
black oval will print as a black rectangle when the overlay is used. To maintain the oval 
shape, turn off (deselect) the "Configure Image Data," "Palette Control ID,"and "Palette 
Control" filters. 

 

c. Click 

OK. 

The Open dialog box appears. 

d.  Make sure Print spool files (*.prn) is selected in the File of type drop-down list. 

e.  Browse to the folder where the files are saved and double-click the file name. 

f. Click 

OK. 

The file is saved as a .bin file. 

g.  Repeat steps 1 through 5 until you have converted all the files you wish to add to the 

Project. 

a. Click 

File

 → Add File to Project. 

b.  Highlight the .bin files you wish to add, then click Open. 

The file names appear in the Project dialog box. 

Note: To delete a file from the project, click the file name, then click File

 → Remove 

File from Project. 

a.  To check the settings for the bin files, double-click the file name. The Edit Component 

Name and ID dialog box appears. 

b.  Here you can edit the 

•  file name 
•  ID number (the  number you need to enter in the printer driver when printing overlays) 
•  volume: 0: = printer's disk drive PCL partition 1: = printer's disk drive Common 

partition %disk0%: = printer's disk drive PostScript partition 2: = Flash memory PCL 
%Flash0% = Flash memory PostScript 

•  path. 

c. Click 

OK. 

d.  When you're through reviewing the settings, click File

 → Save Project. 

a. Click 

File

 → Send Project Files to Printer. Command Issued appears. 

b. Click 

OK. 

 

 

 

272