OKI 8w Lite Manual De Usuario

plugged into the outlet should not exceed 13
amperes.

•

The power outlet into which the printer is con-

nected must remain accessible at all times.

•

Opening any cover may expose hot surfaces.

These are clearly labelled. Do NOT touch them.

•

Do not insert anything into the ventilation slots

on the printer; you could get a shock or cause a
fire.

•

Aside from the routine maintenance described in

the user’s guide, do not try to service the printer
yourself. Opening a cover may expose you to
shocks or other hazards.

•

Do not make any adjustments other than those

outlined in the user’s guide as damage may be
caused to the printer.

If anything happens that indicates that the printer is not
working properly or has been damaged, disconnect the
printer from the power source and contact your dealer.
These are some of the things to look for:

•

The power cable or plug is frayed or damaged.

•

Liquid has been spilled into the printer, or it has

been exposed to water.

•

The printer has been dropped, or the cabinet is

damaged.

•

The printer does not function normally when fol-

lowing the operating instructions.

•

Leave unused toner cartridges and image drum

units in their packages until needed. When
replacing a toner cartridge or image unit, reuse
the packaging to dispose of the old toner cartridge
or image drum unit.

•

Do not expose the toner cartridges and image

drum units to light for more than five minutes.
Never expose the green drum (inside the image
drum unit) to direct sunlight.

•

Always hold the image drum unit by the ends —

never by the middle. Never touch the green drum
inside the image drum unit.

•

To avoid damage to the image drum unit, always

use original toner cartridges.

•

Exercise care when removing the toner cartridge.

Do not let it touch your clothing or porous mate-
rials. The toner powder causes permanent stains.