OKI 7100 Manual De Usuario
TROUBLESHOOTING > 186
Possible cause
Remedy
Computer does not
support USB interface.
support USB interface.
Check if there is a USB controller in the Windows device
manager.
manager.
USB cable does not
meet specifications.
meet specifications.
Use USB cable to specification Ver.1.1.
Interface is disabled.
Check that USB interface is set to Enable.
Configuration
procedure was not
correctly followed or
cancelled.
procedure was not
correctly followed or
cancelled.
Configure again from the beginning.
USB cable is
disconnected or faulty.
disconnected or faulty.
Reconnect or try another cable.
A USB hub is being
used.
used.
Test by connecting the printer and computer directly.