OKI 420dn Manual De Usuario

Printer drivers > 37

This chapter describes how to install a printer driver on two types of operating system – 

Windows and Macintosh.
The printer drivers are all contained on the printer driver CD-ROM (CD1). Please refer to 

the readme file on this CD for the latest information on printer driver installation.

With Windows running, insert the printer driver CD-ROM (CD1) into your CD-ROM 

drive.

If the CD does not run automatically, use Start > Run... and enter E:\setup (where E 

is your CD-ROM drive) in the Open field.

Click on OK.

Select your printer model.

Click on Driver Installation > Install Printer Driver

 

and follow the on-screen prompts 

to complete your printer driver installation.

For the B410d and B410dn only, once the driver has 

been installed, the Printer Menu Setup tool (at 

right) is then automatically installed and the operator 

panel language switching utility will run automatically. 

For the B420dn and B430dn, once the driver has been 

installed, the operator panel language switching utility 

will run automatically. Choose your preferred operating 

language. 

Certain options may have been installed in your printer. For 

those that are installed, check that they appear enabled on 

the Menu Map. 
Ensure that your options are set up in the printer driver(s) by 

making the appropriate settings on the Device Options tab 

(PCL emulation) and/or Device Settings tab (PS emulation) 

described in the chapter entitled “Operation”.

Please refer to the readme file on the CD for details on installing the appropriate Macintosh 

drivers.

Ensure that any installed options are enabled in the printer driver.

The B410d, B410dn and B420dn models allow you to use only a PCL Mac driver. 
The B430dn models can also use a PS driver on Macintosh operating systems.