OKI 521 Manual De Usuario

4 If the SI command is received from your software, the

character pitch selected on the control panel will be
overridden by the SI command.

Character pitch determines the width of the individual
characters and is measured in characters per inch (cpi).
Press the CHARACTER PITCH button successively to
page through the possible selections.

Epson and IBM emulations — 10 cpi, 12 cpi, 15 cpi,
17 cpi, 20 cpi, or Proportional. The lights indicate
which pitch is selected.

Okidata Microline Standard emulation — 10, 12, 15,
17, or 20 cpi, either non-proportional or proportional:
proportional is selected when both the light under the
desired cpi and the light under PROP are lit.

To reset the character pitch to the factory default (10 cpi),
make sure the printer is deselected (SEL light out), then
hold the SHIFT button while pressing CHARACTER
PITCH button.

NLQ Courier

10 cpi*, 12 cpi, 15 cpi, 17 cpi, 20 cpi,

Proportional

NLQ Letter Gothic

10 cpi*, 12 cpi, 15 cpi, 17 cpi, 20 cpi,
Proportional

Utility (Gothic)

10 cpi*, 12 cpi, 15 cpi, 17 cpi, 20 cpi,
Proportional

High Speed Draft

10 cpi*, 12 cpi, 15 cpi, 17 cpi, 20 cpi

(Gothic)

Bar  Code**

Code 39, UPC A, UPC E, EAN 8, EAN 13,
Interleaved 2 of 5, Code 128, Postnet

* cpi = characters per inch

** Bar codes are available only through appropriate software

packages or through programming.