OKI 8480FB Manual De Usuario

Microline 8480FB User’s Guide

 • 42

Detects and corrects paper skew when manual feed through the 

platform is being used with Auto Align enabled [the default]. 

Available settings: Valid Level 1, Valid Level 2 [the default], or 

Invalid.
Change to Valid Level 1 if you wish the detection to be more 

precise.
Change to Invalid if you are experiencing difficulty getting forms to 

load into the printer when using preprinted forms with anomalies 

at the top such as a large dark area on one side or a cutout. Such 

types of forms defeat the skew sensor.   

Sets the alignment method (skew adjustment) engaged for 

manual feed from the platform when the printer is turned on.
Note This setting does not affect the printer when it initializes in 

Available settings:  Align 1, Align 2, Align 3, Align 4, or 

SelectAutoAlign [the default].

• Select Auto Align [the default]:  Skew adjustment is set by 

Auto Align in the Manual Feed group. (see page 41).

• Align x (x = 1, 2, 3, or4):  Skew adjustment is set by the 

corresponding Alignx Pos.Adj in the Manual Feed group (see 

IBM emulation only.
The default is No. If you want the printer to automatically add a 

carriage return when a Line Feed is received at the end of a line, 

change the setting to Yes.

Form Unusable with Auto Align.bmp