OKI 8480FB Manual De Usuario

Microline 8480FB User’s Guide

 • 50

Choose the print quality and speed:  LQ Courier [the default], LQ 

Roman, LQ Swiss, LQ Swiss Bold, LQ Orator, LQ Gothic, LQ 

Prestige, or Utility. 

The default is No. If your system uses the DC1 and DC3 codes for 

print suppress mode, change the setting to Yes.

The default is No. Choose Yes to engage proportional spacing of 

characters.

The default is Invalid. Choose Valid to reduce printing noise.

Sets the amount of memory ( 0 or 128 Kbytes) devoted to holding 

received data. The default is 128 Kbytes. Changing this to 0 will tie 

up your computer while printing, but if you abort the print job, the 

printer will stop much sooner.

Adjusts the print registration for low-speed printing. Available 

settings:  -5 through +5, in increments of 1/360 inch (0.14 mm).

Adjusts the print registration for normal-speed printing. Available 

settings:  -5 through +5, in increments of 1/360 inch (0.14 mm).

Adjust the print registration for high-speed printing. Available 

settings:  -5 through +5, in increments of 1/360 inch (0.14 mm).

Adjust the print registration for draft mode printing. Available 

settings:  -5 through +5, in increments of 1/360 inch (0.14 mm).