OKI 490 Manual De Usuario

Using Your Printer

Setting Top of Form (TOF):

Forms Tear-Off Set to ON

Important!
If you turn the platen knob when the printer is on, the Top of
Form misaligns. Always turn the printer off before turning
the platen knob!

Note: The first line prints at the red line (1) of the plastic

paper shield on the printhead.

With paper loaded and the printer on and selected:

1 Press

PARK

(6) to park the paper.

The SEL light goes off and the red alarm light comes on.

2 Press

SHIFT

(2) and

QUIET/TOF

(7) to reset the current TOF.

3 Press

FF/LOAD

(4) to load the paper.

4 Wait briefly until the paper moves up to the tear position,

then press and hold

TEAR

(5).

The paper moves to the current TOF.

5 Keep holding

TEAR

, then press and hold

SHIFT

(2) and

release

TEAR

6 Continue to hold

SHIFT

, then

Note: When you begin pressing the Micro Feed key, the

printhead will move to the right.

• Press

LF | Micro Feed Down

(3) to set the TOF higher (the

paper moves down).

• Press

FF/LOAD | Micro Feed Up

(4) to set the TOF lower

(the paper moves up).

7 When you have the TOF set where you want it, press and

hold

SHIFT

(2), then press

QUIET/TOF

(7) to engage the new

setting.
The printhead moves back to the left margin.

8 Press

SEL/MENU

(1) to save the setting and place the printer

back on line.

Note: To reset the Top of Form to the factory default, see the

next page.