OKI C3200 Manual De Usuario

Paper recommendations> 14

Your printer will handle a variety of print media, including a range 
of paper weights and sizes, transparencies and envelopes. This 
section provides general advice on choice of media, and explains 
how to use each type.

The best performance will be obtained when using standard 
75~90g/m² paper designed for use in copiers and laser printers. 
Suitable types are:

• Arjo Wiggins Conqueror Colour Solutions 90g/m²;

• Colour Copy by Neusiedler.

Use of heavily embossed or very rough textured paper is not 
recommended.

Pre-printed stationery can be used, but the ink must not offset 
when exposed to the high fuser temperatures used in the printing 
process.

Envelopes should be free from twist, curl or other deformations. 
They should also be of the rectangular flap type, with glue that 
remains intact when subjected to hot roll pressure fusing used in 
this type of printer. Window envelopes are not suitable.

Transparencies should be of the type designed for use in 
copiers and laser printers. We strongly recommend Oki 
transparencies (Order No. 01074101). In particular, avoid office 
transparencies designed for use by hand with marker pens. 
These will melt in the fuser and cause damage.

Labels should also be of the type recommended for use in 
copiers and laser printers, in which the base carrier page is 
entirely covered by labels. Other types of label stock may 
damage the printer due to the labels peeling off during the 
printing process. Suitable types are:

• Avery White Laser Label types 7162, 7664, 7666 (A4), 

or 5161 (Letter);

• Kokuyo A693X series (A4) or A650 (B5).

Business cards recommended are produced by Oki (Order 
No. 09002985).