OKI C3200 Manual De Usuario
Installing additional memory> 71
8.
Identify the RAM expansion slot (1) in the printer.
9.
If the RAM expansion slot already contains a memory
upgrade board, that board will have to be removed before
you can install the new one. To remove it proceed as
follows, otherwise skip to step 10.
upgrade board, that board will have to be removed before
you can install the new one. To remove it proceed as
follows, otherwise skip to step 10.
(a)
Identify the locking clips (2) at each end of the RAM
expansion slot (1).
expansion slot (1).
(b)
Push the clips outward and back into the printer. The
board will pop out slightly.
board will pop out slightly.
(c)
Grip the board firmly by its short edges and pull it
out of the slot.
out of the slot.
(d)
Place the removed memory board in the antistatic
bag which originally contained the new memory
board.
bag which originally contained the new memory
board.
10.
Hold the new memory board by its short edges, so that
the edge connector faces in towards the RAM expansion
slot, and the small cutout is closer to the bottom of the
printer.
the edge connector faces in towards the RAM expansion
slot, and the small cutout is closer to the bottom of the
printer.
11.
Gently push the board into the RAM expansion slot until it
latches in and will not go any further.
latches in and will not go any further.
12.
Locate the three retaining clips at the bottom of the side
cover into their rectangular holes near the bottom of the
printer.
cover into their rectangular holes near the bottom of the
printer.
1
2
2