OKI B411 Manual De Usuario
128 > B411/B431 Troubleshooting
14. The printer will warm up and commence printing when
ready. The page lost through the jam will normally be
reprinted.
Print quality problems
Before consulting a service representative regarding a print
quality problem, check the table below to see if there is a
solution, or something you might have overlooked.
Note
If the edge of the jammed paper protrudes (or can
be seen) from the exit, reinstall the image drum,
close the top cover and switch the printer on.
Remove the jammed paper from the exit when the
exit roller begins rotating after a few seconds after
switching on. However, if the jammed paper cannot
be removed, contact a service representative.
SYMPTOM
PROBLEM
SOLUTION
Blank sheets
printed.
printed.
Image drum cartridge
not properly installed.
not properly installed.
Reinstall image drum
cartridge.
cartridge.
Empty or missing toner
cartridge.
cartridge.
Install new toner
cartridge.
cartridge.
Entire page
prints faintly.
prints faintly.
Empty toner cartridge.
Pages get fainter when
toner is used up.
Pages get fainter when
toner is used up.
Install new toner
cartridge.
cartridge.
LED array is dirty.
Clean LED array.
Page has grey
background.
background.
Static electricity,
generally from dry
environments, causes
toner to stick to
background.
generally from dry
environments, causes
toner to stick to
background.
Change paper to a
smoother laser bond or
use a humidifier.
smoother laser bond or
use a humidifier.
Page prints all
black.
black.
Hardware problem.
Contact service.