OKI 5200n Manual De Usuario
REPLACING CONSUMABLE ITEMS > 58
3.
Lift each of the image drum units out of the printer and place
them in a safe place away from direct sources of heat and
light.
them in a safe place away from direct sources of heat and
light.
4.
Locate the two fasteners (5) at each side of the belt and the
lifting bar (6) at the front end.
lifting bar (6) at the front end.
5.
Turn the two fasteners 90° to the left. This will release the belt
from the printer chassis.
from the printer chassis.
6.
Pull the lifting bar (6) upwards so that belt tilts up towards the
front, and withdraw the belt unit from the printer.
front, and withdraw the belt unit from the printer.
CAUTION!
The green image drum surface at the base of each cartridge is very
delicate and light sensitive. Do not touch it and do not expose it to
normal room light for more than 5 minutes. If the drum unit needs to
be out of the printer for longer than this, please wrap the cartridge
inside a black plastic bag to keep it away from light. Never expose the
drum to direct sunlight or very bright room lighting.
delicate and light sensitive. Do not touch it and do not expose it to
normal room light for more than 5 minutes. If the drum unit needs to
be out of the printer for longer than this, please wrap the cartridge
inside a black plastic bag to keep it away from light. Never expose the
drum to direct sunlight or very bright room lighting.
5
6