OKI B4545 MFP Manual De Usuario

document composed of several pages, the transmission will take place from the page 

where the error occurred

• abandoning the transmission by deleting the corresponding command in the transmission 

line (refer to paragraph Deleting a transmission on hold, page -86).

The terminal makes at most 5 automatic redials. The non-transmitted 
document is automatically deleted from the memory and a transmission 
report is then printed together with an error code and the cause for 
transmission failure (see the communication error codes).

The communication error codes appear in the logs and transmission 
reports.

This code appears after 6 unsatisfactory attempts. Call later.

A communication has been stopped by the user pressing the    key.

A number saved as a one-touch key or abbreviated number is not 
valid-check it. (Example: a delayed transmission was programmed with a 
one-touch key and this key has been deleted in the meantime).

An incident occurred with the scanner, for example, the sheet is jammed.

An incident occurred in the printer: no paper, paper jam, opened cover... 
In the reception mode, this incident appears only if the reception 
parameter is switched to 

The link has been cut (bad line). Check the number and try again.

The document you sent was not well received. Contact your subscriber to 
see if you need to send again.

You tried to poll a document from a subscriber who had not prepared his 
document (no deposit) or the password entered was incorrect.