OKI 110 Manual De Usuario

13  -  C110 User’s Guide

Hold down the Rotate Toner key for 5 seconds to 10 seconds.

The printer enters Print Head Cleanup mode.

For details on cleaning the print head window, refer to “Cleaning 
the Print Head Window” on page 73.

To return to normal operation mode from Print Head Cleanup 
mode, refer to “Cleaning the Print Head Window” on page 73.

Print Head Cleanup mode is a mode that allows the user to clean 
the print head window more easily. The print head window is not 
cleaned automatically.

Hold down the Rotate Toner key more than 10 seconds.

The printer enters Eject All Toner mode.

For details on replacing all toner cartridges at the same time, refer to 
“Replacing All Toner Cartridges at the Same Time” on page 52.

To return to normal operation mode from Eject All Toner mode, press 
the Clear key.

The Cancel key allows you to:

"

Continue a print job after addressing an error message

"

Cancel a print job

"

Reset the printer after a toner cartridge is replaced

For details on resetting the printer after replacing a toner cartridge, 
refer to “Replacing a Toner Cartridge” on page 47.

You can continue a print job after correcting the following types of errors:

"

No more media in the tray

"

Media other than that set in the printer driver was fed into the printer

For details on the error messages, refer to “Indicator Messages” on 
page 86.