Manualsbrain.com
  1. Manuales
  2. Marcas
  3. OKI
  4. 110
  5. Manual De Usuario

OKI 110 Manual De Usuario

Descargar
Página de 110
88  -  C110 User’s Guide
Error Messages
These messages indicate errors which you must correct before a print job 
can continue or the printer status return to “Ready”.
Ready 
indicator 
(green)
Attention 
indicator 
(orange)
Toner 
indicator 
(orange)
Condition
Action
Off
Rapid 
blinking
On
Toner out
» Note: 
This 
message 
appears when 
the Toner Out 
Stop in the 
Remote Panel 
Utility is set to 
On.
Replace the toner cartridge.
» Note: 
If Toner Out 
Stop in the Remote 
Panel Utility is set to 
Off, printing can 
continue.
 
However, the printing 
results are not 
guaranteed.
Off
On
On
The toner cartridge is 
not installed.
Install the all toner 
cartridges.
Toner empty
Replace the toner cartridge. 
Slow 
blinking 
Slow 
blinking 
*
Media empty
Load media into Tray 1. 
Slow blinking 
alternately
*
Media size error
The size of paper 
being printed on is 
different from the 
size of paper 
specified in the 
printer driver.
Press the Cancel key to 
cancel the error.
To print on paper of the size 
specified in the printer 
driver, load paper of the 
correct size into Tray 1, and 
then try performing the print 
job again.
Off
Slow 
blinking 
*
Memory full
Press the Cancel key.
If the error is not corrected, 
turn off the printer. After a 
few seconds, turn on the 
printer.
Off
Blinking
*
Front cover or top 
cover is open. 
Close the front cover and 
top cover.
*
The imaging 
cartridge is not 
installed. 
Install the imaging 
cartridge.