OKI 110 Manual De Usuario

98  -  C110 User’s Guide

Frequent misfeeds in any area indicate that area should be checked, 
repaired, or cleaned. Repeated misfeeds may also happen if you’re 
using unsupported print media.

Several sheets go 
through the printer 
together.

The front edges of 
the media are not 
even.

Remove the media and even up the 
front edges, then reload it.

The media is moist 
from humidity.

Remove the moist media and replace it 
with new, dry media.

Media misfeed 
message stays on.

Some media remains 
misfed in the printer.

Recheck the media path and make 
sure that you have removed all of the 
misfed media.

Media is 

 

misfeeding.

The media is not 
correctly positioned in 
the tray.

Remove the misfed media and 
reposition the media properly in the 
tray.

The number of sheets 
in the tray exceeds 
the maximum 
allowed.

Remove the excess media and reload 
the correct number of sheets in the 
tray. 

The media guides are 
not correctly adjusted 
to the media size.

Adjust the media guides in the Tray 1 
to match the size of the media.

Warped or wrinkled 
media is loaded in the 
tray.

Remove the media, smooth it out, and 
reload it. If it still misfeeds, do not use 
that media.

The media is moist 
from humidity.

Remove the moist media and replace it 
with new, dry media. 

The recommended 
label sheet is facing 
the wrong way in 
Tray 1.

Load the label sheets according to the 
manufacturer’s instructions.

Media is 

 

misfeeding.

Unsupported media 
(wrong size, 
thickness, type, etc.) 
is being used.

The media feed roller 
is dirty.

Clean the media feed roller.

For more details, refer to “Interior” on 
page 69.