OKI 3037 Manual De Usuario
ES 3037/3037e Windows 2000 Operation • 242
Downloading the print file to use as an overlay
In the previous topic, you created a print (PRN) file on your PC’s
hard disk. This topic explains how download this file to the printer
using the Storage Device Manager.
hard disk. This topic explains how download this file to the printer
using the Storage Device Manager.
The Storage Device Manager software is included with the original
software CDs that were supplied with your printer.
software CDs that were supplied with your printer.
1. Launch Storage Device Manager and allow the program to
discover (locate) the printer.
2. Click
Project
then
New Project
.
3. Select
Add File to Project
from the
Project
menu, and select
the PRN file(s) that you created earlier.
PCL: This automatically generates a BIN file.
PostScript: This automatically generates a PostScript hst file. Note
the name that the file is assigned in the Storage Device Manager.
Names are case sensitive.
the name that the file is assigned in the Storage Device Manager.
Names are case sensitive.
4. Make sure the printer being used is highlighted in the lower
window of the Storage Device Manager.
Important!
At this step, you will see in the project window that the BIN file is
assigned an ID number. You can change this ID number by
double-clicking it, and entering a new one in the ID field.
assigned an ID number. You can change this ID number by
double-clicking it, and entering a new one in the ID field.
NOTE
For PCL and PS: this is important because you need to use
this ID number or name when creating overlays in the printer
driver. Therefore, it is recommended you change the ID
number or name from the default value and note it for later
use.
this ID number or name when creating overlays in the printer
driver. Therefore, it is recommended you change the ID
number or name from the default value and note it for later
use.