OKI 391 Manual De Usuario
58
Microline 390/391 Turbo
|
9 Replace the printhead, making sure that the circuit board
at the bottom of the printhead firmly engages the slot (1)
in the carriage.
in the carriage.
32T-hg06.eps
!
CAUTION! Be sure the printhead is fully inserted before
proceeding.
proceeding.
10 Reinstall the printhead clamp and swing it back over to
lock the printhead in place.
32T-hg07.eps
5 5 0 9 1 0 8 6
CAUTION
ATTENTION
VORSICHT
HOT
CHAUD
HEISS
!
Important! The clamp must be between the black
projection on the printhead and the metal plate on the
carriage, on both sides.
projection on the printhead and the metal plate on the
carriage, on both sides.
1