Olivetti P20W Manual De Usuario
UNIX> 82
1.
Log in to the network interface card.
When printing with ftp, use any values for name and
password. However, if the user name is [root], the
password set under TELNET or the utility is required. See
the appropriate section for details.
password. However, if the user name is [root], the
password set under TELNET or the utility is required. See
the appropriate section for details.
Example: Logging in with host name c7350 (or IP address
192.168.20.127).
192.168.20.127).
# ftp c7350
(or
ftp 192.168.20.127
)
Connected to c7350
220 EthernetBoard 8100e Ver 01.50 FTP Server
Name (c7350:<none>) : root
331 Password required.
Password:<CR>
230 User Logged in
ftp>
The network card logical directory structure is hierarchical.
Move to the logical directory; it is not possible to output
print data to the root directory.
Move to the logical directory; it is not possible to output
print data to the root directory.
2.
Move to the preferable logical directory using the cd
command.
command.
Example: moving to the lp directory and confirming the
current directory.
current directory.
ftp> cd /lp
250 Command OK.
ftp> pwd
257 ”/lp” is current directory
ftp>
3.
Configure the transfer mode.
There are two types of transfer mode: BINARY mode, in
which the file content is output as it is and ASCII mode,
which converts the LF code to the CR+LF code. If a binary
file converted by the printer driver is transferred, the
transfer mode has to be BINARY mode.
There are two types of transfer mode: BINARY mode, in
which the file content is output as it is and ASCII mode,
which converts the LF code to the CR+LF code. If a binary
file converted by the printer driver is transferred, the
transfer mode has to be BINARY mode.