Nikon MPS1-2 Manual De Usuario

Frequently-used Commands

This appendix lists some of the most frequently-used commands of the Print Server 
command set. More information about the command set, including additional options, 
can be found in the Print Server Reference Manual on the CD-ROM. 

Please note the following before continuing:

¥ Commands are divided into Server (general), Port, and Protocol 

sections. Within each section, commands are listed alphabetically.

¥ Commands may require privileged user status. Enter 

Set 

Privileged

, then enter the privileged password when prompted. 

¥ When you enter a DeÞne or Purge command, you must reboot the 

Server for the command to take effect.

¥ When the abbreviated syntax Ò

{EN|DIS}

Ó is shown, you must 

choose either Enabled or Disabled to complete the command.