NEC 1765 Manual De Usuario

1–6

1765 Network Printer Configuration Guide

This guide assumes that you are familiar with your 
system and network layout. Installing the LAN card 
and adding the Silentwriter 1765 to your network will 
be easier if you
•

have used your network operating system

•

have the proper network software

•

have a fully operational system

In addition, to complete installation and configuration 
on the network you must have access to the supervisor 
account, or have access to an account that has 
supervisor and print server operator privileges.

The rest of this document describes the tasks necessary 
to complete network installation of the Silentwriter 
1765. You will need to complete the following steps:
1.

Set up the Silentwriter 1765 or upgrade the 
Silentwriter 1760. See Chapter 2, “1765 Set Up.”

2.

Install the NEC 1765 Administration software and 
NEC 1765 Client software. See Chapter 3, 
“Installing NEC 1765 Software.”

3.

Connect the Silentwriter to your Network. See 
Chapter 4, “Configuring Your Network Printer.”

4.

Use NEC 1765 Administration software to configure 
the network and printer. See Chapter 5, “NEC 1765 
Administration Software.”

Once the Silentwriter has been connected to the network 
and configured properly, users can use NEC 1765 Client 
software to manage individual printing jobs. See 
Chapter 6, “NEC 1765 Client Software.”